My Virtual Life

It's finished. See video The final steps were: desolder the floating wire on the LED+ desolder the GND wire, cut it to the same len...

I got the LEDs to work. I verified all the other connections I tried a 5mm LED in the circuit instead of the LED sequin I desoldered--no...

I drilled the hole in the case for connecting the Trinket.  From the webs, I ascertained that I needed about a 1/16" bit (.0625 for a ....

OK. Problem 1 is that, despite  +Phillip Burgess  ' warning, I soldered the Piezo to the Trinket before I wired it correctly (in my defe...

When last we saw this, I was waiting to get replacement 3D printed parts back from the service I used. The first print was missing the handl...

This is my next project, from a tutorial on the Adafruit Learning System .  I enjoyed working with the Pro Trinket in the Donkey project, so...